Bitmain Antminer X3~220 Kh/s @ CryptoNight ASIC Miner

Description

Model Antminer X3 (220Kh) from Bitmain mining CryptoNight algorithm with a maximum hashrate of 220kh/s for a power consumption of 465W. You will need an ATX PSU with at least 10 six pin PCIe connectors. There are 3 six pin PCIe connectors on each hashing board and all three need to be connected to the PSU for the hashing board to operate. Do not connect more than one PSU to the same hashing board. Bitmain recommends the APW3++ to power the X3. Separate power supply to control board: there is one additional six pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 10 PCIe connectors are connected to a power supply. /Product model X3 / Total quantity of hash chips 180 pcs 3 / Total quantity of hash boards 3 pcs / Total hash rate 220 kH/s/DC voltage input 11.60~13.00 V/DC current input @12V DC 38.8 A +7% / DC Power @12V DC input 465 W +7% / 220VAC Power @25℃ 93% conversion efficiency of APW3 500 W +7% / 220VAC Power efficiency @25℃ 93% conversion efficiency of APW3 2.27 J/kH +7% / Weight（without package）5.5 kg/ Operation temperature 0 40 ℃ / Storage temperature 40 85 ℃ / Operation humidity 5%RH 95%RH prevent condensation / Noise 76 dB / Networking connection mode Ethernet Cable / Power connection mode / All three PCI E ports are required to power the board. You can use one PSU to power multiple boards but do not attempt to power one board with two PSUs.We suggest to prevent the control board to be powered up before hash boards be powered up. / Size(Length*Width*Hight without package) 334mm*125mm*207mm

Manufacturer: Bitmain;
Model: ;
MPN: X3 220;
Part Number: X3 220;
UPC: ;
Color: ;
Brand: Bitmain;
Department: ;
Size: ;
Warranty: ;
Label: Bitmain;
Amazon Sale Rank: 6569;