Antminer D3 19.3 GH/s X11 ASIC Dash Miner

Description

1. Specifications of the Antminer D3 are as follows:

a) Hash rate: Hash rate: 19.3 GH/s (Variation of ±5% is expected)

b) Power consumption: 1200W (at the wall with Bitmain’s APW3 PSU 93% efficiency 25°C ambient temp).

c) Dimensions of the miner: 12.6 x5.12 x 7.5″

d) Hashing algorithm: X11 Compatible Coins: DASH ADZ ARC ATX BOLI BOPS BSC CANN CNO CNT COXST CREVA CRM DP ENT ERY FAL GILL GRN HCC HPC INFX J x11 KASH KURT LGBTQ LKC MAR MARX MMM MND MUE OGN ONX OZC PIZZA PXI SAND SEV SMC START TOR TREAU UIS x11 VLTC XCXT XVP

2. Power consumption figures will vary with your PSU’s efficiency the ambient operating temperature and the accuracy of the power meter.

3. It recommends use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power more than one Antminer D3. (NOT INCLUDED)

4. All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!

5. Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the PCIE connectors are connected to power supply.

6. Please select the correct address for shipping before you submit your order because the shipping address cannot be changed after the order has been submitted. The seller does not take any responsibility for or compensate for any loss as result of downtime caused by delays in transportation as a result of custom formalities or other reasons.

Hash rate 193 GHs Variation of 5 is expected
Power consumption 1200W at the wall with Bitmains APW3 PSU 93 efficiency 25C ambient temp
Hashing algorithm X11 Dash and many others
Power consumption figures will vary with your PSUs efficiency the ambient operating temperature and the accuracy of the power meter It recommends use of the APW3 PSU with the Antminer D3 One APW3 PSU can not power more than one Antminer D3
All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate Do not connect more than one PSU to the same hashing board Separate power supply to control board there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power Be sure to power on the miner only after all the PCIE connectors are connected to power supply


Manufacturer: Bitmain;
Model: Bitmain Antminer D3 19 3 GHZ 537 Mgz;
MPN: Antminer D3;
Part Number: Antminer D3;
UPC: 064643735934;
Color: white;
Brand: Antminer;
Department: ;
Size: 19 3GH s;
Warranty: ;
Label: Bitmain;
Amazon Sale Rank: ;